Blog Layout
How to Make Ormus
David Reid • Aug 15, 2021
Three Methods for Making Ormus
*It can be noted here that we don't use any of these three production techniques for the Ormus products offered on this site.
After five years of study, research and chemistry we have developed an organic production technique that mixes minerals from a specific location off of Tasmania, Australia with minerals from a specific pool at the dead sea to produce our Ormus elements. You can find this product here.
We are sharing the three techniques to keep them open source and visible for people beginning their journey with alchemy and Ormus. Where sodium hydroxide ( lye) is mentioned we can confirm that pharmaceutical grade magnesium hydroxide (mgoh) and potassium hydroxide (koh) can also be substituted.
This document may not be reproduced except in its entirety, and without changes. Before trying any of the procedures described in this document, we advise you to thoroughly read this document several times.
This document was created by a group of people who believe that this information is of inestimable value to humanity and should be made widely available as soon as possible. The information here is declared to be in the public domain and we wish that it not become the sole property of any individual or group.
Here we describe some simple ways of making ORMUS so that readers can begin true scientific and intuitive experiments with these materials.
All of these methods are experimental. The following information is presented to promote scientific research into the nature of these materials. Although these methods are based on our best knowledge at this time, further scientific research may prove some of these processes or theories to be inaccurate.
DISCLAIMER
The processes described here have not all been tested extensively. We do not guarantee the procedures in this document, nor the results obtained by using them. To the extent that you use or implement these procedures or the products thereof, you do so at your own risk. In no event will the authors of this document be liable to you, anyone else, or any organization or government, for any damages arising from your use, or your inability to use these procedures or the product thereof. Apply these procedures at your own risk.
VERIFICATION
The material made by some of these methods has been tested by an independent lab using X-ray fluorescence and photo spectrometry to identify the emission spectra of m-state materials. (The lab prefers to remain anonymous). The m-state spectral emissions signature was a broad, flat band rather than discrete lines. The test also showed a significant amount of calcium and magnesium, but no toxins were evident in well-washed material made from unpolluted ocean water.
To further prove that these materials are a different state of the precious elements mentioned above, it is possible to electroplate these elements out as precious metals.
People familiar with Hudson’s process claim that the materials produced using these methods are similar to Hudson’s ORME materials.
INGESTION
We do not recommend the ingestion of these materials since so little is known about them. This information is being provided so that scientific inquiry can commence into the nature of these materials. We realize that, despite recommendations to the contrary, some people will ingest these materials. With this in mind we offer the following information to minimize any possible adverse effects from ingesting these materials. Please read the WARNING and CAUTION sections.
Some people have ingested the m-state materials made by these methods. They suggest that benefits are most likely when dosage is kept small.
Three methods of making ORMUS are described in this document: the WET method, the DRY method, and the BOILING GOLD method. For the materials extracted by the wet and dry procedures, one teaspoon of material, morning and evening, has been found by them to be not harmful over several weeks’ time. A much smaller dose, on the order of a few drops a day, would be more appropriate for the material produced by the boiling gold method. We believe that the m-state may be homeopathic, so a much smaller dose may be the safest — such as 1/64 teaspoon diluted in one quart of pure water, taken two or three ounces once or twice a day.
David Hudson gave some information on dosage in his Dallas speech at: http://monatomic.earth.com/david-hudson/1995-02-dallas-toc.html
WHITEGOLD WEB PAGE
You can find a discussion forum on the WhiteGold Web page. There you can post comments and questions on these procedures, and on ORMUS in general.
WhiteGold Web page: http://www.zz.com/WhiteGoldWeb/
INDEX
Overview
Necessary Supplies
pH Paper or pH Meter
Safety
Wet Method
Starting Materials
Problems Encountered
Avoiding Problems
More in another document…
OVERVIEW
This document describes three methods of producing ORMUS: the WET method, the DRY method, and the BOILING GOLD method.
All three methods use a chemical lab technique called “measuring pH.” The pH of a solution is a measure of its acid/base ratio. You may remember testing pH with litmus paper in high school. pH values less than pH 7 indicate an acid, like distilled white vinegar. pH 7 is neutral, like pure water. Greater than pH 7 is alkaline, like lye.
ORMUS precipitates between pH 8.5 and 10.78.
The WET method produces the least “effective” material but is relatively simple to perform.
Here is the basic WET method in brief. It will be discussed later in detail:
1. Start with drinkable water or clean sea water.
2. Slowly add a solution of lye mixed with water to raise the pH above 8.5 but no higher than 10.78.
3. A white fluffy precipitate will form which you should allow to settle overnight.
4. Remove the liquid above the precipitate.
5. Thoroughly wash the precipitate. It is calcium hydroxide, magnesium hydroxide, and a small amount of m-state material.
Here is the DRY method in brief:
1. Start with dry mineral powder.
2. Boil it in lye water at pH 12.
3. Filter and discard the precipitate.
4. Add distilled white vinegar or hydrochloric acid (HCl) to the filtered liquid to lower the pH to 8.5.
5. Let the precipitate settle overnight.
6. Remove the liquid above the precipitate.
7. Wash the precipitate. That is calcium hydroxide, magnesium hydroxide, and a small amount of m-state material.
And here is the BOILING GOLD method in brief [the BOILING GOLD METHOD has never worked for those who have tried it and we don’t recommend its use]:
1. Boil gold dust in a lye solution.
2. Filter out any solids.
3. Add distilled white vinegar or HCl to the remaining liquid to lower the pH to 8.5.
4. Let the precipitate settle overnight.
5. Remove the liquid above the precipitate.
6. Wash the precipitate. It is almost pure gold m-state material.
NECESSARY SUPPLIES TO MAKE M-STATE
A glass or stainless steel pot. If you use stainless-steel pots, check for steel particles in your precipitate. Although unlikely, this problem may occur if you use large amounts of HCl to lower the pH. Never use aluminum containers or utensils because aluminum will react with acids like HCl and alkalis like lye, and will poison you.
Distilled water from a grocery store.
A stainless steel spatula or knife for stirring, from a grocery store. Never use aluminum containers or utensils because aluminum will react with acids like HCl and alkalis like lye, and will poison you.
A few glass jars. Tall skinny ones work best.
Lye (sodium hydroxide or NaOH). We will use the term “lye” in this document rather than “sodium hydroxide” or “NaOH” since it is shorter and more familiar to most people. Grocery store lye, such as Lewis Red Devil Lye, is not as pure and uncontaminated as laboratory or food-grade lye. We strongly recommend that laboratory or food grade sodium hydroxide be used if the m-state is intended for ingestion since grocery store lye may contain dangerous contaminants. Note: Virtually no lye will be present in the final product so it will be safe to ingest. In any case, lye is not toxic, and it is not caustic when sufficiently diluted (as in these methods).
HCl (hydrochloric acid or muriatic acid). We will use the term “HCl” in this document rather than “hydrochloric acid” or “muriatic acid” since it is shorter. You can use muriatic acid (31% HCl) from a hardware store, but laboratory, electronic or food-grade HCl is less likely to be contaminated. We strongly recommend that laboratory, electronic or food grade hydrocholoric acid be used if the m-state is intended for ingestion since muriatic acid from a hardware store may contain dangerous contaminants. The presence of iron as a contaminant in the acid may interfere with the m-state materials in some applications.
Three eyedropper bottles from a pharmacy. An alternative to eyedroppers is squirt bottles made of HDPE. Find them at a natural foods store or other store which sells bulk liquid products like vegetable oils or lotions.
A large 50 cc plastic syringe from a veterinary supply shop or a lab-supply house. Some suppliers are listed near the end of this document under LAB SUPPLIES.
pH paper or a pH meter. You can get pH paper (pH 1 to 12) from a lab-supply company or a mining supply store. Use new paper because old paper becomes inaccurate. Some suppliers are listed near the end of this document under LAB SUPPLIES.
PH PAPER OR PH METER?
Some experimenters say not to rely on a pH meter because its readings vary with temperature and ionization. Also, a meter costs much more than pH paper. Many pH meter probes can be damaged by very strong acids or alkalis. But some say that a pH meter is essential, for these reasons:
pH paper cannot track rapid changes in pH.
pH paper does not resolve pH readings finely enough. It’s hard to tell the difference between pH 9.5, 10.0, and 11.5.
pH meters are best used to get accurate readings between pH 8.5 and 10.78, which is the main range of concern in these methods.
pH meters can spot check any reading with a standard buffer solution.
a pH meter is more convenient.
Use only a meter that has an automatic temperature-correcting function up to 100 degrees C.
SAFETY TIPS
Clean your containers so that you’d feel safe drinking out of them. Boil containers, syringes, siphons and so on before use to sterilize them.
CAUTION!!
Lye can damage the eyes by rendering the cornea opaque, a form of eye damage that is irreparable. Lye can burn skin, clothes and eyes. Work near a sink, faucet, or other source of wash water. You might keep a spray bottle of distilled white vinegar handy to use against spills.
If you spill lye on your clothes or body, immediately wash it off with lots of water. When working with lye, avoid touching your face or rubbing your eyes. Do not handle lye around food. Use adequate ventilation such as a range hood. Do not dump waste water on the ground. Lye is generally safe to put down the drain, but don’t mix it with any acid that may be in the drain as it can react explosively.
When working with lye, please wear goggles or a full-face visor (an industrial face protector), neoprene gloves, and a PVC lab apron. Sources for this safety clothing are in the Appendix near the end of this document.
Keep children and pets away from the work area, and do not leave it unattended if children or pets are around.
Glass can shatter with hot liquids. Pour boiling liquid from your heating container into a stainless steel mixing bowl to cool before pouring the liquid into a glass container.
THE WET METHOD
STARTING MATERIALS FOR THE WET METHOD
Some starting materials produce a lot of precipitate, while others do not. Listed below are materials that have been shown to produce some precipitate from the WET method:
Some municipal drinking water
Some hot springs water without sulfur
Trace Minerals Inland Sea Water
Urine
Some lake or river water whose bed or course is limestone.
Some well water. Ground water is probably more likely to contain m-state than surface water (except for sea water).
Sea water and sea water reconstituted from certain brands of sea salt, especially from the Great Salt Lake.
Dead Sea water.
Certain brands of unrefined sea salt are as good as sea water: Celtic Gray Sea Salt (from health food stores) and Lima Atlantic Sea Salt (from some health food stores). Add distilled water and use the WET method. Filter the scum first.
The WET method performed on ocean or Dead Sea water produces eleven different m-state elements.
The following materials are ranked in order from most to least m-state content:
1. Dead Sea water
2. Salt Lake water
3. Ocean water
4. Well water
Listed below are materials that have been found to produce little or no precipitate from the WET method:
Water from some alkali lakes (pH above 8.5).
Hot springs with sulfur (because sulfur reduces m-state to metal).
Mineral-free lake or river water
Dead Sea mineral salts that contain sulfur or sulfates, such as “Sea Mineral Bath from the Dead Sea” by Dead Sea Works Ltd. for Sea Minerals Co., and Trace Minerals Research “ConcenTrace Trace Mineral Drops” from the Great Salt Lake.
For the following methods to work, some researchers claim that magnesium or magnesium hydroxide — Mg(OH)2 — must be present in the starting material. (Since the Boiling Gold method is effective without any magnesium, this claim will need to be tested.) Sea water already has Mg(OH)2, so you don’t need to add it to sea water. Try your water first. If you don’t get any precipitate, you might add a teaspoon per gallon of Epsom salts to the starting material for its magnesium. If you do add Epsom salts, the magnesium from them will be a large portion of the precipitate.
WARNING!!
PROBLEMS ENCOUNTERED
The following problems have been encountered by some folks who have made m-state for consumption:
Some people have gotten quite sick from consuming m-state made from sea water collected at a marina. This water contained high levels of lead and other contaminants.
Other people have gotten quite sick from consuming m-state materials which were made improperly. These materials were made without the use of pH test paper or meters and the resulting material contained toxic metals. Please remember that old pH paper can become inaccurate.
People have gotten sick from consuming m-state materials which contained bacteria because they were not sterilized or stored properly.
It is possible to bring the pH of your source material up too quickly, especially if you use lye in too high a concentration. This could result in local areas of very high pH within your solution. These high pH areas could allow toxic metals to precipitate and mix with your desired precipitate.
M-state platinum might be considered toxic by some since it makes you quite ill if you consume alcohol. No one has reported this effect from consuming m-state from sea water.
Some people have used Teflon® coated aluminum sauce pans for heating lye or lye water. The Teflon® got scratched and the aluminum started dissolving in the lye water producing hydrogen gas which could have exploded. The liquid was contaminated with aluminum which is a poison.
AVOIDING PROBLEMS
Use sea water, reconstituted sea water made from sea salt or Dead Sea salt, or salt lake water. In general, start with a clean and deep source of water. Some people have gone out to sea in boats to collect sea water from 100 feet deep.
Generally avoid water that has lead, arsenic or other toxic elements in it. Start with water that is drinkable except for salt content.
Conduct an elemental and toxic analysis of questionable starting-material sources (such as seawater collected close to the shore, or near sources of industrial waste runoff).
Boiling in lye water kills bacteria but it does not destroy toxic metals or chemicals in your source water.
Follow these instructions and slowly change the pH of your solution.
Avoid water with sulfur or sulfates in it because such water produces little or no m-state precipitate.
Never use aluminum containers or utensils because aluminum will react with acids like HCl and alkalis like lye, and could poison you.
WET-METHOD PROCEDURE
Please read CAUTION!! and WARNING!! before proceeding.
First you need to prepare a dilute lye solution. Label an eyedropper bottle or squirt bottle “Lye-poison” so the bottle will not confused with something else. Work in a sink so that any spills will be contained. Lye gives off eye-stinging fumes when mixed with water. To avoid inhaling fumes, hold your breath and wear goggles while doing the following procedure.
Working over a sink, put 8 teaspoons of distilled water in a sturdy glass then stir in 1 teaspoon of lye. Stir until the lye is dissolved. Heat will be generated as the lye dissolves and the glass may get fairly hot. You may want to close your eyes to avoid eye-stinging fumes, taking a peek periodically.
Pour the lye solution into a labeled eyedropper bottle or squirt bottle.
If you are using pH paper, tear off several 1/4″ pieces and put them on a piece of white paper on a plate.
For the best accuracy, recalibrate the pH paper throughout the day with changes in temperature and humidity, as well as day-to-day. Buffer solutions of pH 4, 7 and 10 will help with this. Sources of pH buffer solutions are listed near the end of this document under LAB SUPPLIES.
If you are using dried sea minerals, mix 1/2 cup of dry material with 2 cups of distilled water. This makes sea water. Now proceed as described below:
1. First, you might want to pour the sea water through a coffee filter to remove any scum.
2. If the starting material does not contain magnesium hydroxide (sea water does contain magnesium hydroxide), add some, or add a teaspoon of Epsom salts per gallon of water.
3. Pour the sea water into a stainless steel pot. Slowly, drop-by-drop, add the lye solution WHILE STIRRING. Every ten drops or so, test the pH. You might want to take at least 3 to 5 samples from different regions of the liquid. If you are using pH paper, the goal is to bring the pH up to 9.5, then stop to be on the safe side. If you are using a pH meter, stop just before you get to pH 10.78.
A white precipitate which includes m-state elements will form.
CAUTION: You must proceed slowly and patiently so that you do not exceed pH 10.78 with a meter or pH 9.5 with pH paper. If you go higher than pH 10.78, you might get a “Gilcrest precipitate” of toxic heavy metals. It is alleged that the Dead Sea salt water does not produce any Gilcrest precipitate. This has not been proven and should not be assumed.
4. Once you are at the correct pH, stop.
5. Pour the solution into a clean glass jar or test tube.
6. The white precipitate (slurry) slowly settles on the bottom of the jar. Let the slurry settle overnight. If metals or other toxins have been ruled out by prior testing of your starting material, the slurry is probably mostly calcium hydroxide, Mg(OH)2, lye, and a small amount of m-state.
You can speed this settling process with a centrifuge, which forces the precipitate to settle rapidly. Inexpensive second-hand centrifuges may be found at American Science and Surplus, http://www.sciplus.com.
7. Using a large syringe (or siphon), remove the liquid above the slurry.
8. Add distilled water to the precipitate (filling the jar), stir thoroughly, and let it settle again for at least 4 to 5 hours, preferably overnight.
9. Repeat steps 7 and 8 at least three times to thoroughly wash the precipitate. This should remove almost all of the lye. The remaining lye can be neutralized with HCl or distilled white vinegar as well. Washing three times is intended to reduce the dissolved “impurities” (like salt, for example) by 87.5%. Four washes would provide a 93.75% reduction, five washes a 96.875% reduction, and so on.
At this point, the precipitate is likely to contain some m-state, milk of magnesia Mg(OH)2, calcium, and perhaps some impurities.
Pour the precipitate and water into a stainless steel pot on a stove burner. A gas burner is preferred over electric because any magnetic fields from the electric burner may drive off some of the m-state material. Cover the pot with a lid to contain the m-state, and boil the solution for 5 minutes to sterilize it. Be careful not to spill the hot solution! Let it cool back to room temperature and recheck the pH to make sure it hasn’t exceeded pH 9.
DISCUSSION: WHEN TO BOIL THE SOLUTION
In this document, we suggested that you not boil the solution until you have made the washed precipitate. However, boiling can be done earlier in the procedure with certain advantages. Here are four times that boiling could be done, with a discussion of the pros and cons of each:
1. Boil before adding lye solution.
PROS: Faster reaction, faster precipitation. CONS: You may spill the hot lye solution. You may inhale fumes.
2. Boil while adding lye solution.
PROS: Faster reaction, faster precipitation. CONS: You may spill the hot lye solution. You may inhale fumes. Danger of lye spurting out of pot. Not recommended.
3. Boil and cool after adding lye solution.
PROS: No danger of inhaling fumes. Little danger of spilling hot lye solution. CONS: Slower reaction, slower precipitation.
4. Boil the washed precipitate (recommended).
PROS: No danger of inhaling fumes. No danger of spilling hot lye solution. pH is unlikely to change after boiling because the reaction has already taken place. CONS: Slower reaction, slower precipitation. If safety is the main issue, this seems to be the best method.
Caution: If you boil the solution on an electric burner, the magnetic field in the burner may “blow off” some of the m-state materials, resulting in a small yield. This can be minimized by adding a source of sodium (such as sodium hydroxide or salt) to the solution before boiling.
Since sea water contains sodium in salt, none of the boiling methods will be a problem with sea water. However, if you are starting with low-sodium fresh water, add a sodium source (such as table salt or lye solution) before boiling.
Once the precipitate and water have been sterilized, the next step is required to concentrate the m-state.
HOW TO PURIFY YOUR PRECIPITATE
[Note – These methods were not well tested before being added to this document. More recent experimentation with these methods reveals that they do not work as suggested and may actually be detrimental to the final product. The “purification” step is not necessary to get good ORMUS precipitate for plant or animal use. Plant experiments suggest that if the precipitate is dried out it no longer has any measurable benefits for plants.
These methods are still included in this document because they might be useful as a basis for some future method of assaying the ORMUS content of the precipitate. The second method seems to work best.]
The precipitate made from sea water contains milk of magnesia (Mg(OH)2), which precipitates approximately around the same pH range that m-state does.
Here are four methods to separate Mg(OH)2 from m-state:
METHOD 1
1. Suppose you just made a precipitate by adding lye solution to sea water. The precipitate is m-state mixed with Mg(OH)2.
2. Use a syringe to remove the liquid over the precipitate, and discard the liquid. This leaves only the m-state/Mg(OH)2 precipitate.
3. To the wet precipitate, add hydrochloric acid (HCl) until you reduce the pH to 1.0 – 3.5. You can use muriatic acid (31% HCl) from a hardware store, but lab-grade HCl is less likely to be contaminated. A safe alternative to HCl is distilled white vinegar.
4. The white colloidal precipitate should dissolve, leaving a clear solution.
5. Add lye solution VERY SLOWLY drop-by-drop to bring the pH back up to 8.5 – 8.7. The precipitate that forms should be m-state mostly free of Mg(OH)2 (because m-state precipitates in this pH range, and Mg(OH)2 does not precipitate until pH 9.)
Note that your total yield may be diminished because you are not going past pH 8.7.
6. Remove the liquid above the precipitate, and wash the precipitate. It should be mostly m-state.
METHOD 2
This procedure removes the Mg(OH)2 by dissolving it below pH 9. First get some HCl (or muriatic acid) and coffee filters. A safer alternative to HCl is distilled white vinegar.
1. Dry the precipitate in a dark oven at about 275 degrees F for one or two hours. This forms a dry powder.
2. Take the dry powder and pulverize out any clumps.
3. In a glass container, cover the powder with some distilled water. For example, one liter of water for one cup of powder.
4. Add HCl or distilled white vinegar drop-by-drop to bring the pH to 5 or 6.
5. Shake the bottle and let it sit overnight. The dried m-state should not dissolve at that pH, but the Mg(OH)2 should dissolve.
6. The next day, after all the Mg(OH)2 has dissolved, pour everything into filter paper.
7. Wash the powder collected in the filter paper several times with distilled water to remove any residual traces of HCl or vinegar.
8. The washed powder may be oven-dried again at about 275 degrees F, and you should have m-state powder free of Mg(OH)2.
METHOD 3
1. Dry the original precipitate at about 200 degrees F.
2. Mix the resulting powder with distilled white vinegar or 30% HCl. Everything which does not dissolve in m-state. This will be quite a small amount if you start with sea water. (If you mix pure HCl with distilled water, remember: ADD ACID TO WATER, NEVER ADD WATER TO ACID).
3. Measure the amount of HCl/m-state solution (or vinegar/m-state solution).
4. Add distilled water to the HCl/m-state solution. Add an amount of water that is at least ten times the amount of HCl/m-state solution. (You may substitute distilled white vinegar for HCl).
5. Filter the solution through 5 layers of coffee filters.
6. Wash the powder at least three times in a large amount of distilled water.
METHOD 4
1. Starting with clean wet precipitate, add lye to bring the pH up to 12. The m-state precipitate will dissolve, but magnesium hydroxide and the Gilcrest precipitate will not.
2. Filter out the precipitate.
3. To the remaining liquid containing only m-state, add HCl or distilled white vinegar drop-by-drop until the pH reaches 8.5.
4. Add lye solution drop-by-drop to bring the pH back up to 10.78. The resulting precipitate should be only m-state.
5. Wash the precipitate as described earlier.
6. To be safe, check the pH of the precipitate slurry. It should be 9 or less before ingesting.
DRY METHOD
Please read
CAUTION!!
and
WARNING!!
before proceeding.
This method takes longer than the WET method. In some cases, it involves boiling lye for several hours, which may spray some caustic solution around your work area. Please wear neoprene gloves, a PVC lab apron, and eye goggles when you use this method. Sources for this safety clothing are listed near the end of this document under LAB SUPPLIES.
Some people have reported adverse reactions to the WET method precipitate or powder. This may be due to the Gilcrest precipitates which occur above pH 11.5. The DRY method removes the dangerous Gilcrest precipitates, so it results in safer material.
EXTRA SUPPLIES NEEDED FOR THE DRY METHOD
12-cup coffee filters from a grocery store.
Hydrochloric acid. You can use muriatic acid (31% HCl) from a hardware store, but lab-grade HCl is less likely to be contaminated. Other acids can be used, but HCl will not harm the body if accidentally ingested in weak solutions and in small amounts. You might prefer to use distilled white vinegar instead of HCl. Although distilled white vinegar (acetic acid) is weaker than HCl, is it safer to work with.
Heavy plastic HDPE cottage cheese containers, 1 pint and 1 quart, to hold the coffee filters.
MAKING A HOLDER FOR THE COFFEE FILTERS
1. Start with a pint and a quart container for cottage cheese. Make sure the pint container will fit into the quart container. The pint container should hang inside the lip of the quart container.
2. Across the bottom of the pint container, punch or drill several holes, 1/8″ to 1/4″ diameter, about 1/4″ apart.
3. If the small container fits too tightly into the larger container, you may need to drill some air-pressure equalization holes around the outside of the large container near the level of the bottom of the small container. Otherwise the air pressure between the two containers will keep liquid from draining from the coffee filters. When you use this filter, place the cottage cheese containers in a stainless steel or glass container to catch any overflow. The lye water that you will be filtering may damage counter tops or cabinets if it contacts them.
4. The coffee filters should fit nicely into the smaller top cottage-cheese container.
DRY METHOD STARTING MATERIALS
Generally start with dry material such as sweepings from salt and alkali flats, rock powders, limestone, mineral salts, Isis or Etherium white gold powder, volcanic ash, plant cinders, etc.
These are some materials that produce a lot of precipitate from the DRY method:
Crushed, unheated limestone (Caution: agricultural grade powdered limestone from some sources contains sufficient lead and/or arsenic to be a potential hazard)
Golden Nectar trace mineral formula
Etherium/Isis Gold powder
Ancient Secrets Dead Sea Mineral Salts
Masada salts (unscented)
DRY-METHOD PROCEDURE
Please read
CAUTION!!
and
WARNING!!
before proceeding.
First you need to prepare a dilute lye solution. Label an eyedropper bottle or squirt bottle “Lye-poison” so the bottle will not confused with something else. Work in a sink so that any spills will be contained. Lye gives off eye-stinging fumes when mixed with water. To avoid inhaling fumes, hold your breath and wear goggles while doing the following procedure.
Working over a sink, put 8 teaspoons of distilled water in a sturdy glass then stir in 1 teaspoon of lye. Stir until the lye is dissolved. Heat will be generated as the lye dissolves and the glass may get fairly hot. You may want to close your eyes to avoid eye-stinging fumes, taking a peek periodically.
Pour the lye solution into a labeled eyedropper bottle or squirt bottle.
If you are using pH paper, tear off several 1/4″ pieces and put them on a piece of white paper on a plate (as illustrated above). Now proceed as described below:
1. Grind the starting material to a fine powder.
2. Add 1:4 lye solution to cover the dry material with a thin layer.
3. Stir in some distilled water to cover the powder and lye by 2 inches.
4. Bring to a boil (this is best done outdoors or in an exhaust hood). The pH should be at or slightly above 12. The lye brings the m-state elements into solution while leaving the Gilcrest precipitates as solids.
NOTE: If you start with sea salt, you can omit the boiling step with its noxious fumes, and simply let the solution sit for three days. Then go directly to Step 7. (Some other starting materials might also react without boiling).
5. If you are boiling the solution, replace water as needed to maintain sufficient reactant volume.
6. Boil for several hours — the longer the better — in a closed container. The container may be open if you add liquid as needed. Four hours should be sufficient for Etherium/Isis material.
7. Strain the slurry through 3 to 5 layers of coffee filters. You are removing the toxic elements (Gilcrest precipitate) that precipitate above pH 11.5.
Save the liquid that passes through the filters. Most m-state present will be in solution in the liquid.
8. While stirring the liquid, slowly add HCl or distilled white vinegar to bring the pH down to 8.5. A white precipitate forms which is partly m-state.
If you go too far, the pH will abruptly shift, and you will have to start over. If this happens you must add lye quickly and bring the pH back up to 12.
9. Let the precipitate settle overnight.
10. Using a large syringe (or a siphon), remove the liquid above the slurry.
11. Add distilled water to the precipitate (filling the jar), stir thoroughly, and let it settle again for at least 4 to 5 hours, preferably overnight.
12. Repeat steps 10 and 11 at least three times to thoroughly wash the precipitate. This removes most traces of lye and HCl (or vinegar).
You’ll get a wet, white precipitate (slurry) containing m-state elements. Check that the pH is 9 or less before ingesting. Some of the precipitate may be milk of magnesia or calcium. If you wish, you can remove them using the precipitate purification procedures described above.
BOILING-GOLD METHOD [The BOILING GOLD METHOD has never worked for those who have tried it and we don’t recommend its use.]
Please read
CAUTION!!
and
WARNING!!
before proceeding.
This method produces pure gold ORMUS. With this method, you must boil some lye solution for one to two weeks. This may spray some caustic solution around your working area. Please wear neoprene gloves, a PVC lab apron, and eye goggles when you use this method. Sources for this safety clothing are noted under LAB SUPPLIES near the end of this document.
EXTRA SUPPLIES NEEDED FOR THE BOILING-GOLD METHOD
Coffee filters from a grocery store.
Hydrochloric acid (HCl). You can use muriatic acid (31% HCl) from a hardware store, but lab-grade HCl is less likely to be contaminated. Instead of HCl, you might prefer to use distilled white vinegar (acetic acid). Distilled white vinegar is weaker than HCl but is safer to use.
A stainless steel pot or glass pot will work, but stainless steel and glass are attacked by NaOH. Glass is preferred over stainless steel.
A preferred container is a sealed Teflon® or HDPE bottle in a water bath in a crock pot. Please note that a Teflon® bottle is NOT the same as a Teflon® coated aluminum container. Never use aluminum or Teflon® coated aluminum containers and utensils because aluminum will react with acids like HCl and alkalis like lye, and will poison you.
If you use a sealed Teflon® or HDPE bottle in a water bath fill it only half full with your lye and gold then squeeze the bottle to eliminate most of the air above the liquid before you tighten the cap. This will allow the bottle to expand as the liquid is heated.
PROCEDURE FOR THE BOILING-GOLD METHOD
1. Add 99.99% pure gold dust to a lye solution of pH 12 or more.
2. Boil the solution for two weeks in a CLOSED container. One week may be sufficient, but two weeks will likely have a higher yield. Add water as needed. CAUTION: Do not inhale the vapors!
3. Strain the solution using the coffee filter holder described above. Save any remaining gold for future use.
4. Add HCl or distilled white vinegar to bring the pH down to pH 8.5. An off-white precipitate will appear. Let it settle overnight.
5. Using a syringe, carefully suck out the liquid above the precipitate.
6. Add distilled water to the precipitate (filling the jar), stir thoroughly, and let it settle again for at least 4 to 5 hours, preferably overnight.
7. Repeat steps 5 and 6 at least three times to thoroughly wash the precipitate.
APPENDIX
M-STATE STORAGE
Store m-state materials in
* Glass mason jars with wire-clamped glass lids and rubber gaskets
* Glass jars with plastic lids, or
* HDPE containers, which are stable in acid and alkali
Store m-state materials in the dark away from sunlight or ultraviolet light. Ultraviolet light seems to move some m-state materials toward a metallic state.
Because m-state materials are superconductors, they should be stored in glass or HDPE containers inside of steel containers and away from moving magnetic fields. Put the glass or HDPE container (containing m-state) inside a steel tin such as those used for Christmas cookies, gourmet popcorn or potato chips. If you intend to transport m-state materials, it is best to nest three or four steel containers, one inside the other with insulating material between, and place the glass or HDPE container inside the inmost steel container.
You may notice that your m-state materials have bubbles rising from them for a period of time after they are made. We believe that these bubbles are m-state gas escaping. Some people have reported that the m-state precipitate loses some of its effect as these bubbles leave. This off-gassing seems to be reduced if the m-state is stored between room temperature and body temperature in a magnetically shielded container. It is advisable not to refrigerate m-state materials. At least one researcher reports that refrigerated m-state materials are likely to move toward a warmer place.
Since bacteria and mold can easily grow in m-state precipitate, it is best to sterilize any material which you wish to store for long periods of time and to store it using water bath canning methods.
CHEMICAL SUPPLIERS
Mowre W.E. Co.
1425 University Ave.
St. Paul, MN 55104
800-544-1550 (646-1895)
This supplier sells gold bullion, gold wire, gold shot, etc. They sell to individuals through the mail and will process small orders. Good prices. _________________________________________________
Strem Chemicals, Inc.
Dexter Industrial Park
7 Mulliken Way
Newburyport, MA 01950-4098
info@strem.com
http://www.strem.com
No minimum order.
(978) 462-3191
(800) 647-8736
Some sample products:
93-7915 Gold powder (99.95%) 500 mg $50. 2g $160.
93-7913 Gold shot (99.95%) 500 mg $40. 2g $128.
LAB SUPPLIES
Cole-Parmer Instrument Co. 800-323-4340.
Weiss Research Inc.
P.O. Box 720109
Houston, TX 77272
1-888-44-Weiss and fax: 281-879-9666 (24/7 fax)
http://www.weissresearch.com
They have a $175 pH meter (# PHM-150) with auto temperature compensation from 0 to 100 degrees C, and a pH meter with manual temperature conversion for $125.
McMaster-Carr Supply Co.
P.O. Box 4355
Chicago, IL 60680-4355
630-833-0300
fax 708-834-9427
http://www.mcmaster.com
McMaster-Carr Supply Co.
P.O. Box 54960
Los Angeles, CA 90054-0960
Sales & Customer Service: 562-692-5911
Fax: 562-695-2323 (24/7 fax)
Plastic syringe 50 cc with tapered tip 7510A665 pkg. of 10 $18.57
Neoprene gloves 5278T3 (S,M,L,XL,XXL)
Neoprene Rubber gloves 5283T6 (M,L,XL) size needs to be specified.
Wide-range pH test paper 8707T11 $8.89
PVC apron 53445T75 $4.55
Safety goggles with a face shield 5422T12 $18.94.
Also available are a pocket pH meter for $59, pH solutions,
water-test kits, hot plates, plastic tubing, and much more.
No minimum order. They sell to anyone and take VISA.
Edmund Scientific Company
101 East Gloucester Pike
Barrington, NJ 08007-1380 USA
Customer service: 1-609-573-6260 9 AM to 5 PM M-F
Disposable plastic syringes are available at many veterinary and agricultural supply stores. Plastic infusion tips are available from the same source.
More sources can be found at:
http://monatomic.earth.com/database/lab-sources/
STARTING-MATERIAL SOURCES
Sea water: Sigma Chemical. $10/liter. From the Gulf of Mexico.
Sterile.
http://www.sigma.sial.com/
Sea salt to reconstitute sea water: Health-food store, oriental food store.
Target Glacial Rock Dust from Gaia Resources in Grand Forks, BC, Canada.
Get gold from a coin dealer.
Get gold dust by panning for it in a stream.
Gold dust might be available from Keene Engineering in Northridge, CA.
See CHEMICAL SUPPLIERS earlier in this Appendix.
Also check out a gold mining supply store.
In California try http://www.treasurenet.com/calgold/prospect.html
The gold should be at least 99.99% pure gold.
Golden Nectar (trace minerals). $40/gallon.
http://bulksales.com/index.htm
Sun Gazing Process We have a super computer in our bodies given to us by the nature, which is our brain. HRM (Hira Ratan Manek) calls it the “brainutor”. The brain is more powerful than the most advanced super computer. Each and every human being is gifted with innumerable talents, and infinite inherent powers by nature. Individuals should never underestimate themselves. Everyone is gifted. If we make use of these powers we can take ourselves to great levels. Unfortunately, these infinite inherent powers are programmed in that part of the brain that is largely dormant and goes unused. Even medical science agrees we hardly make use of the brain but about 5-7% – the most brilliant of humans like Albert Einstein is reported to have used only about 32% of their brains. The Solar Healing Center is focused on helping humanity to develop a better understanding of how the sun can be used to heal the mind, body and spirit as demonstrated by Hira Ratan Manek, who, as a result of sungazing, has claimed better physical, mental, emotional and spiritual health.
Hira Ratan Manek (HRM), among others, have proven that a person can live just on solar energy for very long periods without eating any food. This has come to be known as the HRM phenomenon. The method is used for curing all kinds of psychosomatic, mental and physical illnesses as well as increasing memory power and mental strength by using sunlight. One can get rid of any kind of psychological problems, and develop confidence to face any problem in life and can overcome any kind of fear including that of death within 3 months after starting to practice this method. As a result, one will be free from mental disturbances and fear, which will result in a perfect balance of mind. If one continues to apply the proper sun gazing practice for 6 months, they will be free from physical illnesses. Furthermore, after 9 months, one can eventually win a victory over hunger, which disappears by itself thereafter. This is a straightforward yet effective method based on solar energy, which enables one to harmonize and recharge the body with life energy and also invoke the unlimited powers of the mind very easily. Additionally, it allows one to easily liberate from threefold sufferings of humanity such as mental illnesses, physical illnesses and spiritual ignorance. If we can activate the human brain and awaken these infinite powers inherent in ourselves then we can raise ourselves to higher levels. We can achieve any results we want. In order to operate the brain effectively, it needs to be activated. Being a holistic entity it needs a holistic power supply. Sun energy is the source that powers the brain, which can enter and leave the human body or the brain only through one organ that is the human eye. Eyes are the Sun Energy’s entry doors to the human brain. They are also known as the windows of the soul. Recent research has found out that the eye has many functions other than vision. And more information is continuing to be revealed about the functions of the eye. The eyes are complex organs and they have 5 billion parts much more than a spacecraft that has about 6-7 million parts. By this, you can see the immense capacity of the human eye. HRM asserts that the rainbow is in the eye not in the sky. The seven colors of the sun is only the reflection of what is in the eye. We can create a rainbow anytime we want – go to the garden, just observe below a source of flowing water as the sun moves above. There you will see the rainbow. Eye can receive the entire spectrum of the sunlight. It’s like having a glass window. Eye is the perfect instrument to receive all the colors of the rainbow. Since eyes are delicate parts of the body, we have to use them in such a way that they serve our purposes without getting damaged. Present day teachings and ideas such as don’t look at the sunlight at all –you will damage your eyesight; never go out in the sun as you will get cancer, are causing needless hysteria and paranoia. The more you are away from the nature, the more there is a cause for illness and you will automatically support global corporations. There are definite foolproof ways of getting the benefits of the nature without exposing ourselves to its adverse effects. It is also as intuitive as when the clouds gather we become gloomy. When we see the sun, we feel energetic and connected to the truth. Namaste
The Avadhoota Gita is writen by Sage Dattatreya. Dattatreya is regarded by many as the foremost incarnation. He was the combined incarnation of Brahma, Vishnu and Shiva. His narration was recorded by his two deciples Swami and Kartika. It is undoubtedly one of the ancient most Hinhu Scriptures. Dattatreya belonged to the ancient Vedic period as there is a Dattatreya Upanishad in the Atharvaveda. He is definitely before the Ramayana period as it is mentioned that Dattatreya taught the Shoda- nyasa of Srividya to Lord Parashurama, who was before Lord Rama. He also taught the Asthanga Yoga to Patanjali, who then wrote the famous Patanjali Yoga Sutras. The Avadhoota Gita is regarded by almost all sages as the greatest treatise on Advaita Vedanta. Some are of the openion that Dattatreya was the originator of Tantra. Legends about his birth are many and varied, and the place he died is unknown. It is stated that he was born on Wednesday, the 14th day of the Full Moon in the month of Margashirsha, but of year and place there is no reliable information. Scholars speculate it must have been not less than 5000 B.C, or even earlier. Swami Vivekananda once said of the Avadhoota Gita, ‘Men like the one who wrote this song keep religion alive. They have actually self-realized; they care for nothing, feel nothing done to the body, care not for heat, cold, danger, or anything. They sit still enjoying the bliss of Brahman.’ The story of Dattatreya is told in many Puranas. The story from Markandeya purana, chapter 15, is as follows: A brahmin named Kaushika was enchanted by a courtesan and lost his wealth, health etc. However, his wife, Shandili was faithful to him. She even carried him on her shoulders to the courtesan’s place. Once, by mistake, she stepped on Sage Mandavya and the sage cursed both of them to die by sunrise. Shandili prayed and appealed that the sun may never rise so that her husband would live. Her prayer was answered and the devas were in an uproar seeing the world order of time destroyed. They asked for the help of Anusuya, the wife of sage Atri, to convince Shandili. Anusuya was able to convince Shandili on the condition that Kaushika would live on sunrise. In appreciation of Anusuya’s intervention, the gods granted her three boons. She asked for her liberation, her husband’s liberation and that the three gods Brahma, Vishnu and Shiva be born as sons to her. The wishes being granted, from Sage Atri’s eyes issued a light and served as the seed for the divine sons – Soma, Durvasa, and Datta – partial incarnations of Brahma, Shiva and Vishnu, respectively. Other puranas give different narratives but all involve the attribution of the name Dattatreya to mean ‘Son of sage Atri.’ For example, there is a story is that the gods decided to test the chastity of Anasuya, the wife of the rishi Atri. So, brahma, Vishnu and Siva went to her posing as handsome men. However, Atri was not fooled and transformed all three of them into a single child with three heads. This child is known as Dattatreya and is considered to be an incarnation of all the three gods: Brahma, Vishnu and Mahesha. At birth, Dattatreya looked like a well-developed child of three or four years. Right after his birth, he told his mother, ‘I am leaving home.’ She told him to at least wear a langoti, a loincloth. He said that he did not need one: ‘I will live just as I have come.’ And he spent his whole life as an avadhoota. He initiated thousands of people. Even while on the move, he would make disciples, give mantra diksha, work for their deliverance, without any discrimination according to religion, caste, sex or conduct. He spent most of his life wandering in the area between and including North Mysore, through Maharashtra, and into Gujarat as far as the Narmada River. One scripture refers to a disciple finding Datta meditating on Gandhmadana Mountain. He attained realisation at a place not far from the town now known as Gangapur. He is said to have lived a rather unconventional life, first being a warrior, then renouncing the world and practicising yoga and then drinking wine and living with a maiden etc to show his disciples that he could be unattached to such mundane pleasures even if he indulges in them. Dattatreya is said to have met Shankara near Kedarnath before Shankara’s mahasamadhi. There is a still a cave in Kedarnath signifying this event. Apart from Avadhuta Gita, he also composed the Jivanmukta -gita which is a short compendium of 23 verses which talks about the jnani (jivan mukta), a tantrik text known as Haritayana Samhita and Dattatreya Tantra. Dattatreya is also mentioned in the Mahabharata, in the Yagyavakya Upanishad, Jabala Upanishad, Narada-Parivraja Upanishad, Bhikshu Upanishad ans Shandilya Upanishad. The Vaishnavites hold him in high esteem since he is mentioned as a incarnation of vishnu. Dattatreya is the narrator of the Jnana Kanda of tripura rahasya to Parasurama to dispel the latter’s doubts on liberation. This contains the famous Shodanyasa of Devi. (The story of Samvrata found in tripura rahasya has been cited by shankara in his brahma suutra bhashya). Dattatreya is usually depicted with four dogs by his side, representing the four vedas, a cow behind him representing Lord Vishnu, a trident in his hand representing Lord Shiva and three heads representing Lord Brahma. (Click here to down load Avadhuta Gita)
A true spiritual teacher does not have anything to teach in the conventional sense of the word, does not have anything to give or add to you, such as new information, beliefs, or rules of conduct. The only function of such a teacher is to help you remove that which separates you from the truth of who you already are and what you already know in the depth of your being. The spiritual teacher is there to uncover and reveal to you that dimension of the inner depth that is also peace. If you come to a spiritual teacher or this book looking for stimulating ideas, theories, beliefs, intellectual discussions, then you will be disappointed. In other words, if you are looking for food for thought, you won’t find it. And you will miss the very essence of the teaching, the essence of this book which is not in the words but within yourself. It is good to remember that, to feel that, as you listen. The words are no more than signposts. That to which they point is not to be found within the realm of thought but a dimension within yourself that is deeper, and infinitely vaster than thought. A vibrantly alive peace is one of the characteristics of that dimension. So whenever you feel inner peace arising as you listen, the book is doing it work and fulfilling its function as your teacher. It is reminding you of who you are and pointing the way back home. This is not a book to be read from cover to cover and then put away. Live with it. Pick it up frequently. And, more importantly, put it down frequently. Or spend more time holding it than reading it. Many readers will feel naturally inclined to stop reading after each entry, to pause, reflect, become still. It is always more helpful and more important to stop reading than to continue reading. Allow the book to do its work, to awaken you from the old groves of your repetitive and conditioned thinking The form of this book can be seen as a revival for the present age of the oldest form of recorded spiritual teachings, the sutras of ancient India. Sutras are powerful pointers to the truth in the form of aphorisms or short sayings with little conceptual elaboration. The Vedas and Upanishads are the early sacred teachings recorded in the form of sutras, as are the words of the Buddha. The sayings and parables of Jesus, too, when taken out of their narrative context could be regarded as sutras as well as the profound teachings contained in the Tao Te Ching, the ancient Chinese book of wisdom. The advantage of the sutra form lies in its brevity. It does not engage the thinking mind more than is necessary. What it doesn’t say, but only points to, is more important than what it says. The sutra-like character, of the writings in this book is particularly marked in chapter 1, Silence and Stillness, which contains only the briefest of entries. This chapter contains the essence of the entire book and may be all that some readers require. The other chapters are there for those who need a few more signposts. Just like the ancient sutras, the writings contained within this book are sacred and have come out of a state of consciousness we may call stillness. Unlike those sutras, however, they don’t belong to any one religion or spiritual tradition, but are immediately accessible to the whole of humanity. There is also an added sense of urgency here. The transformation of human consciousness is no longer a luxury, so to speak, available only to a few, isolated individuals, but a necessity if human kind is not to destroy itself. At the present time, the dysfunction of the old consciousness and the arising of the new are both accelerating. Paradoxically, things are getting worse and better at the same time, although the worse is more apparent because it makes so much noise. This book, of course, uses words that in the act of reading or listening, become thoughts in your mind. But those are not ordinary thoughts: repetitive, noisy, self- serving, clamoring for attention. Just like every true spiritual teachers, just like the ancient sutras, the thoughts within this book don’t say “look at me”, but “look beyond me.” Because the thoughts came out of stillness, they have power, the power to take you back into the same stillness from which they arose. That stillness is also inner peace. And that stillness and peace is the essence of your being. It is the stillness that will save and transform the world. (Click here to download stillness speaks)
Jesus said, GOD IS LIGHT,” and no man of that day knew what he meant. The day is now here when all men must know what Jesus meant when He said “GOD IS LIGHT”.For within the secret of Light is vast knowledge yet unrevealed to man. Light is all there is; it is all we have to deal with, but we do not yet know what it is. The purpose of this message is to tell what it is. Today’s civilization has advanced far in knowing HOW to deal with matter but we do not know WHAT matter is nor the WHY of it. Nor do we know what energy, electricity, magnetism, gravitation and radiation are. Nor do we know the purpose of the inert gases and WHAT they are. Nor do we know the structure of the elemental atoms nor the gyroscopic principle which determines that structure. Nor are we aware of the fact that is a two-way continuous universe of balance in all effects of motion and not a one-way discontinuous universe. Nor have we even yet heard of or suspected the most important of all principles in physics, THE VOIDANCE PRINCIPLE and the mirrors and the lenses or space which are the cause of illusion in all moving things. Nor do we even consider the entire material electric universe to be the illusion which it is; there being no reality to it whatsoever. Nor have we the slightest inkling of the cause of curvature of space, nor the voidance of that curvature in planes of zero curvature at wave field boundaries. No one now knows how it is that crystals get their various shapes. It will amaze the world to know that those shapes of crystals are determined in space by the shapes of the wave fields which bound the various elemental structures. Nor have we the slightest conception of what constitutes the life principle, nor the principle of growth, nor the simultaneous unfoldment-refoldment principle which repeats all patterns in Nature sequentially and records and voids them as they are repeated. Nor are we aware of that recording principle by means of which the Creator carries forth the sum totals of every sequential cycle in His unfolding and refolding universe unto the very end of its manifestations upon one planet and its beginning on a new one. Nor are we dynamically aware of the souls and seeds of things These roots of universal repetition are now but metaphysical abstractions to religion and physical guesswork to science. Within the secret of Light is the answer to all of these heretofore unanswered questions, and many more, which the ages have not yet solved. This revelation of the nature of Light will be the inheritance of man in this coming New Age of greater comprehension. Its unfoldment will prove the existence of God by methods and standards acceptable to science and religion alike It will lay a spiritual foundation under the present material one of science. The two greatest elements in civilization, religion and science, will thus find unity in marriage of the two. Likewise human relationships will become more balanced because of greater knowledge of universal law which lies behind all of the processes which light uses to interweave the patterned forms of this electric wave universe. There is no department of life which will not be vitally affected by this new knowledge of the nature of Light, from the university to the laboratory, from government to industry, and from nation to nation. I therefore give it to you with all of its clarity as I myself have become aware of it from behind the scenes of this cosmic cinema of light illusion which is our universe. Walter Russell (Click here to download The Secret of Light)
READ. BELIEVE OR NOT, BUT READ. AND THE VIBRATION FOUND THEREIN WILL AWAKEN A RESPONSE IN YOUR SOUL. The history of the tablets translated in the following pages is strange and beyond the belief of modern scientists. Their antiquity is stupendous, dating back some 36,000 years B.C. The writer is Thoth, an Atlantean Priest-King, who founded a colony in ancient Egypt after the sinking of the mother country. He was the builder of the Great Pyramid of Giza, erroneously attributed to Cheops. (See The Great Pyramid by Doreal.) In it he incorporated his knowledge of the ancient wisdom and also securely secreted records and instruments of ancient Atlantis. For some 16,000 years, he ruled the ancient race of Egypt, from approximately 50,000 B.C. to 36.000 B.C. At that time, the ancient barbarous race among which he and his followers had settled had been raised to a high degree of civilization. Thoth was an immortal, that is, he had conquered death, passing only when he willed and even then not through death. His vast wisdom made him ruler over the various Atlantean colonies, including the ones in South and Central America. When the time came for him to leave Egypt, he erected the Great Pyramid over the entrance to the Great Halls of Amenti, placed in it his records, and appointed guards for his secrets from among the highest of his people. In later times, the descendants of these guards became the pyramid priests, by which Thoth was deified as the God of Wisdom, The Recorder, by those in the age of darkness which followed his passing. In leg- end, the halls of Amenti became the underworld, the Halls of the Gods, where the soul passed after death for judgment. During later ages, the ego of Thoth passed into the bodies of men in the manner described in the tablets. As such, he incarnated three times, in his last being known as Hermes, the thrice-born. In this incarnation, he left the writings known to modern occultists as the Emerald Tablets, a later and far lesser exposition of the ancient mysteries. The tablets translated in this work are ten which were left in the Great Pyramid in the custody of the pyramid priests. The ten are divided into thirteen parts for the sake of convenience. The last two are so great and far-reaching in their import that at present it is forbidden to release them to the world at large. However, in those contained herein are secrets which will prove of inestimable value to the serious student. They should be read, not once, but a hundred times for only thus can the true meaning be revealed. A casual reading will give glimpses of beauty, but more intensive study will oven avenues of wisdom to the seeker. But now a word as to how these mighty secrets came to be revealed to modern man after being hidden so long. Some thirteen hundred years B.C., Egypt, the ancient Khem, was in turmoil and many delegations of priests were sent to other parts of the world. Among these were some of the pyramid priests who carried with them the Emerald Tablets as a talisman by which they could exercise authority over the less advanced priest-craft of races descended from other Atlantean colonies. The tablets were understood from legend to give the bearer authority from Thoth. The particular group of priests bearing the tablets emigrated to South America where they found a flourishing race, the Mayas who remembered much of the ancient wisdom. Among these, the priests settled and remained. In the tenth century, the Mayas had thoroughly settled the Yucatan, and the tablets were placed beneath the altar of one of the great temples of the Sun God. After the conquest of the Mayas by the Spaniards, the cities were abandoned and the treasures of the temples forgotten. It should be understood that the Great Pyramid of Egypt has been and still is a temple of initiation into the mysteries. Jesus, Solomon, Apollonius and others were initiated there. The writer (who has a connection with the Great White Lodge which also works through the pyramid priesthood) was instructed to recover and return to the Great Pyramid the ancient tablets. This, after adventures which need not be detailed here, was accomplished. Before returning them, he was given permission to translate and retain a copy of the wisdom engraved on the tablets. This was done in 1925 and only now has permission been given for part to be published. It is expected that many will scoff. Yet the true student will read between the lines and gain wisdom. If the light is in you, the light which is engraved in these tablets will respond. Now, a word as to the material aspect of the tablets. They consist of twelve tablets of emerald green, formed from a substance created through alchemical transmutation. They are imperishable, resistant to all elements and substances. In effect, the atomic and cel- lular structure is fixed, no change ever taking place. In this respect, they violate the material law of ionization. Upon them are engraved characters in the ancient Atlantean language: characters which respond to attuned thought waves, releasing the associated mental vibration in the mind of the reader. The tablets are fastened together with hoops of golden-colored alloy suspended from a rod of the same material. So much for the material appearance. The wisdom contained therein is the foundation of the ancient mysteries. And for the one who reads with open eyes and mind, his wisdom shall be increased a hundred-fold. The Emerald Tablets (click here)
Our Body of Sound and light Sound is Light at a lower vibration and Light is Sound at a higher oscillation. This single scientific fact can change our conception of reality for it becomes evident that all of creation both physical and manifest, spiritual and unseen is one unity of great beauty and simplicity. Quoting from “Spectro-Chrome Metry Encyclopaedia”, by Dinshah Ghadiali – “Just as there are 7 Divisions on the Physical Plane and the Rainbow has 7 Colors, the Energy known as Sound has 7 notes in Music and the same note recurs on the eighth key, only it has a higher or lower Pitch according to which side of the Scale is reckoned. Each complete Scale of Notes is called “Saptaka” or Septave, meaning the Scale of Seven. Actual measurement shows that going from the low to the high, each eighth note has a vibration rate of double the number; thus, each Octave from low to high has double the vibration frequency in the high as in its neighboring low and to find the Octave Frequencies means a question of simple arithmetic.
BIBLICAL REFERENCES Manna Well when I found the Hebrew dictionary, I found out that the Hebrew word for “What is it?” is Ma-Na. Manna literally means the same thing, “What is it?” And when you understand that the Hebrew people were actually, lived in Egypt for generations, they were the artisans, they were the metallurgists, they were the craftsman. And when they left out of Egypt they took this knowledge with them. –David Hudson, Dallas presentation Shewbread The Egyptians were very methodical record keepers, and they did date everything very specifically. And the shewbread was obviously not a flower but a silver or gold. In the Book of Exodus it is said that the shewbread was made by Bezaleel, who was a goldsmith. Bezaleel is the man who made the Ark of the Covenant, made the golden decorations for the tabernacle, and made, you know, he was a goldsmith, and yet he made the Bread of the Presence of God. But the shewbread wasn’t called shewbread then. The shewbread was called the Bread of the Presence of God. Remember before he was talking about being in the Presence as the Bread of the Presence? –David Hudson, Dallas presentation Gold glass And in fact, I believe there was a forge going on Mt. Sinai, because at 1,160 degrees the white powder of gold can be melted to a transparent glass of gold. It literally becomes a glass as clear as window glass, and yet it is pure gold, it’s not a gold compound, it’s pure gold. You can take it in a mortar and pestle and grind it right back to the white powder, but it is, it looks absolutely like glass. –David Hudson, Dallas presentation Churches of Revelation And our physical body no longer controls our light body, our light body now controls our physical body. And anywhere we can think we would like to go, we can travel there not only spiritually, but physically, and take our physical body with us. Now coincidentally, in the Bible, this is referred to as the rapture. It says, two will be working in the field and one will be gone, two will be laying in bed and one will be gone. It will be a physical taking up and disappearing from where you’re at. It says in Revelations, ‘Blessed be the man who will overcome for he shall be given the hidden manna, the white stone of purest kind, up on which will be written a new name.” [Rev. 2:17] You will not be the same person you were before you took the material. It actually says you will have a new name, you will be a different person. When you become filled with the spirit, when you become filled with the chrism, you are not the same person you were before. –David Hudson, Dallas presentation Bread and Wine Okay, it was called “the Bread of Life” and the “Bread of Life” was mixed with the water and was called the “Living Water”. Okay? This material is what Moses commanded Bezaleel, the goldsmith. It wasn’t a baker, it wasn’t a woman, it was a goldsmith who was told to prepare the “Bread of the presence of God”, and this “Bread of the presence of God” was set out on a golden table in front of the Ark of the covenant. You remember the ark of the covenant, they also placed the stones, through which God spoke to Moses, and gave him the ten commandments. _________________________________________ And if all of you recall, the Bread and the Wine were shared with the twelve Apostles, but the Bread and the Water were shared on Mt. Herod with James, Peter and John. When Christ was transfigured before their eyes, a column of light came out the top of his head, okay? And then after that time, James, Peter and John could perform all the miracles that Christ had performed previously, and nobody could do what Christ did before that time. Okay, next slide. This is from the same book, “The image of Bread and Wine vibrates in the background, the charge administration of Bread and Wine, but still Egypt was involved and it was running out of the Bread. It’s spiritual revelation was dying away”. –David Hudson, Dallas presentation ARK OF THE COVENANT Okay, so, in the Ark of the Covenant was the pot of the Manna, and the stone through which god spoke to Moses. Now when Moses was up on Mt. Sinai, he was smelting the Manna to the gold glass. And why do I say that? Well, when you understand that in old kingdom Egypt these were called bushes not eyelashes. These were bushes, check you’re Egyptian literature. The burning bush was the enlightened Third Eye. And so Moses on Mt. Sinai, when he looked upon the burning bush, was just a mistranslation, it was the third eye was open and god communicated to him through this stone. God didn’t write on the stone, if he wrote on the stone why would he put it in a box, seal it up and then let no one look at it? If god wrote on it he would put it up on the wall where everybody could read it. And when you realize that in old kingdom Egypt, that on the holiest day in old kingdom of Egypt, in the “Sign of the Seal” you read this, that they carried around an Ark on two poles, and in the Ark was a stone. Coincidentally what was in the Ark of the Covenant? A stone. The pot of Manna and the stone. The gold glass. And I’m saying that around the Ark of the Covenant was the Meissner field. Now, the strange thing about a Meissner field is other Meissner fields, that oscillates at the same frequency, can enter that field and not perturb it. And so if you are a high priest, a Melchizedek priest, and you eat this Bread of the Presence of God every week, you are a light being, and you can enter into that field and approach the Ark of the Covenant and not perturb it because you’re in resonance with it. But if you’re an ordinary soldier or a person who thinks bad things, ha-ha-ha, you know, they have to tie a rope around your legs because as you approach it, it may have a flux collapse. Now if you can imagine several hundred thousand amps and now you have volts, it’s like a bolt of lightning. It literally is energy that is of unbelievable magnitude. –David Hudson, Dallas presentation Moses on Sinai This material is what Moses commanded Bezaleel, the goldsmith. It wasn’t a baker, it wasn’t a woman, it was a goldsmith who was told to prepare the “Bread of the presence of God”, and this “Bread of the presence of God” was set out on a golden table in front of the Ark of the covenant. You remember the ark of the covenant, they also placed the stones, through which God spoke to Moses, and gave him the ten commandments. And the Bible says, up on Mt. Sinai, that the Hebrew people said there was fire and there was smoke. It was if a forge was going up on Mt. Sinai. But when you recall that Moses had been there previously and in the area of Sinai is where copper was being mined and smelted. And in fact, I believe there was a forge going on Mt. Sinai, because at 1,160 degrees the white powder of gold can be melted to a transparent glass of gold. –David Hudson, Dallas presentation Sir Lawrence Gardner has an interesting theory that fits well with what we know about the ORMUS materials. Gardner claims that Serâbît el-Khâdim on the Sinai is the mountain where Moses made gold into a powder. In a lecture transcript he says: “Another cause of wonderment has been the innumerable inscribed references to ‘bread’, along with the prominent hieroglyph for ‘Light’ found in the Shrine of the Kings. The discovery which caused the most bewilderment, however, was the unearthing of something which was identified as the enigmatic mfkzt to which the ‘bread’ symbolism seemed to be related. Laying some inches deep in a storeroom was a considerable supply of the finest, pure white, unadulterated powder. At the time, some suggested that the powder could be a remnant of copper smelting, but, as was quickly pointed out, smelting does not produce white powder; it leaves a dense black slag. Moreover, there was no supply of copper ore within miles of the temple, and the old smelting works were in any event apparent in the distant valleys. Others guessed that the powder was ash from the burning of plants to produce alkali, but there was no trace whatever of any plant residue. For want of any other explanation, it was determined that the white powder and the conical stones were probably associated with some form of sacrificial rite, but again it was pointed out that this was an Egyptian temple and animal sacrifice was not an Egyptian practice. Moreover, there were no remnants whatever of bones or any other foreign matter within the mfkzt, which appeared for all the world like a hoard of sacred talcum-powder.” –from STAR FIRE – The Gold of the Gods a transcript of a lecture by Laurence Gardner in Nexus magazine. This entire transcript can be found in three sections on the Nexus web site at: http://www.peg.apc.org/~nexus/starfire1.html http://www.peg.apc.org/~nexus/starfire2.html http://www.peg.apc.org/~nexus/starfire3.html Gardner has had another recent lecture transcript (Bloodline of the Holy Grail) published in Nexus. In these and other transcripts Gardner links many historic events to the ORMUS materials. In his various lectures and books Gardner claims that the ORMUS materials are related to the Great Pyramid, Moses on Mt. Sinai, manna, the Philosopher’s Stone, soma, Jesus and the Essenes, the physical immortality of ancient patriarchs, possible ancient alien influences and many other historic items. In fact, Gardner makes the point that the ORMUS materials were a major focus of much of our world’s spiritual history. Transcripts of several of Gardner’s lectures are available on the web. Other transcripts of Gardner lectures can be found on the web at Karen Lyster’s award winning web site. This site is certainly one of the most beautiful on the web. The following related documents are linked from the main directory of Karen’s site: The Bloodline & The Holy Grail The Bloodline, Starfire & The Anunnaki Genesis Of The Grail Kings Copper Scroll If you read in there, in the Dead Sea Scrolls, that they, in the copper scroll it says they had 26 tons of gold and 48 tons of silver. Okay? 26 tons of gold and 48 tons of silver. It’s like they were making this stuff. They had no business, no way of making any money. –David Hudson, Dallas presentation HINDU REFERENCES Kundalini/Prana Ah, I was, about three weeks ago, I was handed a book, called “Secrets of the Golden Flower” by Richard Wilhelm with an introduction by Carl Jung. Richard Wilhelm did the eastern translations for Jung. This book was written in 1931, and it’s been translated and been reproduced, and published several times since then, I guess it’s now in paperback because some people are getting paperback copies now. Anyway, it verbatim describes this sound. And it says in the book it seems to all be about this sound, the “hu”. Well we are the hu-man. The man who can hear the sound. Okay? This is about the “hu”, the sound. And that it says in there that you get this energy in your pelvis, and that it can be developed where it literally will take your whole body up over your head and everything. And when it finally is at a state of perfection that it will feel like there is a column of light coming right out the top of your head. I think the word that most people use for it is the kundalini. But that’s what it is. –David Hudson, Dallas presentation Hindu alchemy It’s interesting to note that the philosophical text . . . over in the Ayurvedic text, I was sent a copy by the Maharishi Mahesh Yogi who knows of this work, and he had it translated into English and sent it over to me. These are about 2,000 B.C. that this information comes from supposedly, and it says you can take mercury and divide mercury, and divide mercury and divide mercury, until you divide it into it’s essence and you actually get a white powder of mercury. And the way you test that mercury to see if it’s ready for ingestion, is you heat it in air and if it turns to gold, then it’s ready for ingestion. –David Hudson, Dallas presentation At the very touch of a philosopher’s stone the sharp iron sword is turned into gold and afterwards it does not cut, even if it has the appearance of a sword. Even so, the ego of the Siddha-Jnani or the Jivanmukta, though it has the appearance of individuality and presents a physical body, cannot bind the Siddha again to rebirth, for it is transformed into Suddha-Sattva by the touch of the Supreme Wisdom of the Absolute. –Sri Swami Sivananda’s Vedanta for Beginners section II, #9 EGYPTIAN REFERENCES Pyramid references Ah, I’ll give you my opinion of what I think, how I think the king, the Great Pyramid… You know that the Great Pyramid was, had an overlay of the white limestone, and was painted in rainbow colors as they went up the side of it. But the capstone of the Great Pyramid was gold glass, was a superconductor. Literally the Great Pyramid was actually dug down and built on solid bedrock because the Earth vibrates the Om vibration, the low frequency vibration, then transfers up through the pyramid into the superconducting material and literally is the vibration that charges the superconductor. And I believe that when the gold glass capstone was on the Great Pyramid, that literally at night, it glowed. And can you imagine what a sight it had to be to be coming across the desert and see this huge white, rainbow colored pyramid with this huge glow of light on the top of it. You know? –David Hudson, Dallas presentation Book of the Dead (“What is it” references) Curious enough, in the ancient Egyptian text it was always referred to as the “What is it?”, and if you read in the papyrus of Ani that was found in the tomb of Pepe the 2nd in old kingdom Egypt, it says, “I am purified of all imperfections, what is it, I ascend like the golden hawk of Horus, what is it, I come by the immortals without dying, what is it, I come before my father’s throne, what is it, and it goes on and on, page after page, talking about all these attributes that you acquire as you ascend, but they always stop and ask the question, “What is it”? –David Hudson, Dallas presentation Initiation 3rd Deg. Initiation Ceremony, Part II: Akhnaton’s Message The torchbearer now approached the initiates indicating them to sit. He took the first in the row to the center of the chamber instructing her to position in front of the sarcophagus. Then an acolyte carrying a lapis lazuli platter with a small alabaster vessel approached her. The vessel had carved a winged Aton Disk wrapping its wings around the body. In it was Ben(31), the mysterious “What Then Is It”(32), a white powder dissolved in water(33)(34)(35)(36). As a sacred act of communion, he handed her the vessel to drink. ALCHEMICAL REFERENCES Artephius Dew It’s called the “white dew”, the “white condensate”, “the white dove” or it’s depicted as a white feather in the alchemical texts. Because that’s the way it was purified as a volatile material. Okay? All of the symbols of being fed by a dove, or receiving the white dove, is always an alchemical symbol. –David Hudson, Dallas presentation ANCIENT CHINESE REFERENCES Chinese alchemy Acupuncture You want the rhodium for cancer. Iridium is more for the healthy person who then has the cancer under control and then is looking for the Elixir of Life. Iridium works just like gold. Both of them seem to effect the, what’s called by the acupuncturists, the meridian system. –David Hudson, Dallas presentation